Electric slag discharge gate valve purposes: Slag gate valve for nominal pressure PN1.6 ~ 6.4Mpa, operating temperature 0 ~ 100 ℃ thermal power station water system and hydraulic engineering mortar discharge system piping, cut off or connected to the pipeline Medium, suitable medium: gray water mixture, slag mixture (slag water ratio of 1: 6, the maximum degree of electric slag discharge gate structural features: the use of flange bolts, both ends of the branch pipe flange connection or butt welding connection The opening and closing parts are made of semi-hermetic seal and have excellent performance. The sealing material is wear-resistant ceramic or wear-resistant alloy with strong abrasion resistance, strong abrasion resistance, abrasion resistance, abrasion resistance, small friction and reliable sealing Valve body outlet runner knot reasonable, no slag, opening and closing flexible, not jammed stem by the quenched and tempered nitriding surface treatment, good corrosion, abrasion resistance and abrasion resistance. Large diameter set of rolling bearings, opening and closing easily.
1. Applicable to medical equipment and beds
2. Mute effect: Bearing Steel mute, high strength, low noise
3. Humanized design, stable braking performance, Easier to use
Caster For Medical Bed,3 Inch Medical Casters,3 Inch Hospital Bed Castors,3 Inch Medical Caster Wheels
Yangjiang Xingyang Industry & Trade Co.,Ltd. , https://www.xycaster.com