For Weifeng tripod maintenance problems, we usually wait until the Weifeng Tripod is broken before we pay attention to inspection and maintenance. We rarely test the Weifeng tripod for warranty. In this way, the life of Weifeng Tripod will be greatly reduced. Moreover, the Weifeng tripod after partial damage, if we continue to use it if we do not pay attention, its damage will be even greater, so this is a problem worthy of our attention. Today, I am here to bring you the Weifeng tripod repair method, I hope you can correctly master the method of repairing Weifeng tripod.
Weifeng tripod how
Weifeng tripod top manufacturing process, preferred materials, solid and practical, large bearing capacity, multi-functional design.
Weifeng tripod model
Weifeng tripod models are: C285 carbon fiber tripod, 6620A photography tripod, 6663A aluminum-magnesium alloy, 717 aluminum alloy tripod and so on.
Weifeng tripod price
Weifeng tripod prices are high and low, ranging from a few hundred yuan to a thousand dollars. It is suggested that before buying, you may wish to visit the store first. The key is to choose the style that is suitable for your own use is the most important.
Note: This price is for reference only! Due to geographical differences, of course, the price will be different. For more details on the prices, please refer to the local distributors!
Weifeng Tripod Instructions
1. Use the tripod's lifting function to remove the tripod before using it and rotate the joystick to the working height. (The working height is equal to the height minus 30 centimeters.) Take down the quick mount version of the head to install the quick mount version.
2, the screw is locked at the bottom of the camera. Mount the camera and quick mount on the head and adjust the working height according to the camera to be photographed. Then use the joystick to adjust the height.
3. When unfolding each leg tube, be sure to fully open each leg tube until it is fully opened and fully deploy the three leg tubes. Because when the camera is operated, if the tube is not pulled to the end there will be a board.
Weifeng tripod repair
One, Weifeng tripod quick lock tripod stall damage replacement
1: Use the needle nose pliers to twist the lower hexagon nut. Because it is difficult to rotate the copper nut and the limit screw extrusion screw during long-term use, it is easier to screw the lower limit screw.
2: Use a Phillips screwdriver to rotate the lower limit screw. When unscrewing, press the screw as far as possible to forcefully screw it down to avoid the screw slipping.
3: Use a needle nose pliers to unscrew the hexagonal copper nut.
4: Remove the lock block and spring.
5: Remove the quick lock.
6: Use a Phillips screwdriver to unfasten the screws that fasten the push button protection sheet, remove the protection sheet, and take out the push button that cuts off the position pin. When the push button is pulled out, be sure to move lightly so that the spring inside will not fly out. .
7: Put on a new push button, in order to ensure smooth push button can be applied a little high-temperature oil, or vaseline, or other oil lubrication.
8: The end is a series of assembly back to the process, of course, remember to debug the pressure and leg tube is smooth!
Second, Weifeng tripod regular maintenance
1: To determine which locking structure is in trouble, press down on the foot frame when the foot frame is fully opened. If a certain leg tube slides downward, it indicates that the corresponding locking structure of the section needs to be adjusted. .
2: Remove the rubber plug and find the screw of the locking structure.
3: Unscrew the screws of the locking structure. Some tripods use for a long time. It may be difficult to screw the screws. You can use a screwdriver to tap a few times and spin it.
4: After unscrewing the screw, remove the locking knob and place the locking knob on the 6-point nut again. Select the locking knob to ensure enough force to lock the tripod and test the pressure to confirm OK.
5: Then remove the locking knob, find the card point of the hand wheel in the picture above, adjust the position of the locking knob, ensure that the card point is near the bump point of the lower figure, and then reinstall it.
6: Replace the screw and cover the rubber stopper. You're done.
Editor's summary: The most important thing for a tripod is its stability. If the tripod is too light or the quality of the connection part is too low, the entire tripod rack will be unstable and this situation will occur. When people buy a tripod, in addition to considering its price, firmness, and weight, it is also necessary to consider how many feet it is. How to adjust? Weifeng tripod prices are high and low, choose the style for their own use is the most important, how to locate the tripod also requires everyone to slowly explore.
Vacuum Pump Repair Curtain Installation Method Weifeng Tripod Repair
Wrought Iron,Wrought Iron Designs,Wrought Iron Panels,Welding Wrought Iron
Xiamen XMillion Co.,Ltd. , https://www.xmilliondoor.com